The Brasch Oxygen (O2) Detector has an easy to read digital display that continuously indicates ambient O2 concentrations. The concentration of oxygen is monitored and ventilation equipment cycled when selected threshold levels are exceeded. As oxygen levels decrease, contacts are provided to actuate ventilation equipment and an audible internal alarm will activate if O2 levels continue to decline. Since ventilation equipment is only required when O2 levels are low, energy costs for HVAC operation are significantly reduced.
The Brasch Oxygen Detector has the capacity to accept either one or two sensor inputs. Both signals may be remote, provided through the use of Brasch Oxygen Transmitter(s) or one may be integral (local), with or without a remote transmitter attached.
The Brasch Oxygen Transmitter is used to provide a proportional analog signal to the Brasch Oxygen Detector, the Brasch Universal Multi-Input Control Panel, a Direct Digital Control System (DDCS) or a Building Management System (BMS). It is also used in variations of Brasch Combination Gas Detectors that require a remote O2 sensor.
GSE-OX-D (Zip Submittal Compilation of the following individual files)
A211 Brasch Gas Detector Brochure
I-687 GSE Gas Detector Installation, Operation and Maintenance Instructions
S-713 Brasch Oxygen Detector Sample Specification
GSE Oxygen Detector Operation Sequence
GSE Detector Typical Mounting and Wiring
GSE Detector Submittal Form
GSE-OX-T (Zip Submittal Compilation of the following individual files)
A212 Brasch Gas Transmitter Brochure
I-688 GSE Gas Transmitter Installation, Operation and Maintenance Instructions
S-733 Brasch Oxygen Transmitter Sample Specification
GSE-TRNS Transmitter Typical Mounting and Wiring
GSE-TRNS Transmitter Submittal Form