Nitrogen Dioxide Detector and Transmitter

//Nitrogen Dioxide Detector and Transmitter

Nitrogen Dioxide Detector and Transmitter

Nitrogen Dioxide Detector and Transmitter - GSE-ND
Brasch GSE-ND Nitrogen Dioxide Detector
Nitrogen Dioxide Detector and Transmitter - GSE-ND-TRNS
Brasch GSE-ND-TRNS Nitrogen Dioxide Transmitter
Shop Brasch Gas Detectors
Typical Applications
  • Bus Parking Garages
  • School Bus Repair Facilities
  • Truck Repair Facilities
  • Commercial Bus Maintenance Garages
  • Warehouses and Factories
  • Firehouses

The BRASCH Nitrogen Dioxide (NO2) Detector and Nitrogen Dioxide Transmitter combine safety and energy savings. A common producer of NO2 is diesel engine exhaust. Diesel exhaust is a known cancer causing agent as reported in the U.S. Department of Health and Human Services’ Current Intelligence Bulletin 50. In accordance with recognized National Standards the permissible exposure limit of NO2 is 1 PPM. An electro-chemical cell is required to measure such small amounts of NO2. The GSE-ND detector’s and transmitter’s sensor is capable of measuring NO2 in increments of 0.1 PPM. The easy to read digital readout continuously displays present NO2 concentrations.

The Brasch Nitrogen Dioxide Detector has the capacity to accept either one or two sensor inputs. Both signals may be remote, provided through the use of Brasch Nitrogen Dioxide Transmitter(s) or one may be integral (local), with or without a remote transmitter attached.

The Brasch Nitrogen Dioxide Transmitter is used to provide a proportional analog signal to the Brasch Nitrogen Dioxide Detector, the Brasch Universal Multi-Input Control Panel, a Direct Digital Control System (DDCS) or a Building Management System (BMS). It is also used in variations of Brasch Combination Gas Detectors that require a remote NO2 sensor.

Key Features
  • Microprocessor Controlled
  • Factory Calibrated
  • Electrochemical Sensor
  • Static Discharge Protection
  • Low Voltage Wiring
  • Power Loss Fail-Safe
  • Corrosion Resistant Enclosure
  • High and Low Alert Level
  • 4-20 mA, 0-1 VDC, 0-5 VDC or 0-10 VDC output options