Combination CO and O2 Detector and Transmitter

//Combination CO and O2 Detector and Transmitter

Combination Oxygen and Carbon Monoxide Detector and Transmitter

Brasch GSE-NCM-LL Combination Carbon Monoxide-Nitrogen Dioxide Detector
Brasch GSE-NCM-LL Combination Carbon Monoxide/Nitrogen Dioxide Detector
Brasch GSE-NCM-LR Combination Carbon Monoxide-Nitrogen Dioxide Detector
Brasch GSE-NCM-LR Combination Carbon Monoxide/Nitrogen Dioxide Detector
Shop Brasch Gas Detectors
Typical Applications
  • Offices
  • Warehouses and Factories
  • Condominium and Apartment Buildings

This unique combination gas detector finds application where it is desirable to meet Indoor Air Quality (IAQ) standards and protect occupants from the dangerous carbon monoxide fumes of fossil fuel consuming heating equipment. The Brasch Combination Detector utilizes a dual sensor system that monitors both gases. The easy to read digital display continuously oscillates between O2 and CO concentration readings.

As target gas levels change, contacts are provided to actuate ventilation equipment and an audible internal alarm will activate if levels continue to diverge from preset levels. Since ventilation equipment is only required when levels are outside selected parameters, energy costs for HVAC operation are significantly reduced.

The Brasch Combination Detector accepts two sensor inputs and may be provided with both signals integral (local), one integral and one remote or both remote. When a remote signal is desired, the Detector is provided with Brasch Gas Transmitter(s) as required.

Key Features
  • Microprocessor Controlled
  • Electrochemical Sensors
  • Factory Calibrated
  • Power Loss Fail-Safe
  • Low and High Level Alerts
  • Built-in Self Test Feature
  • May be directly connected to Building Management or Direct Digital Control Systems
  • 4-20 mA, 0-1 VDC, 0-5 VDC or 0-10 VDC output