Electric Heaters and Gas Detectors                          

Welcome

Electric Heat

Gas Detectors

About Us

News / Press

Contact Us

Site Map

Sign In

Select an item to learn more

bulletOverview
bulletCarbon Monoxide Detector
bulletNitrogen Dioxide Detector
bulletOxygen Detector
bulletCarbon Dioxide Detector
bulletRefrigerant Detector
bulletMulti-Input Gas Monitor Panels
bulletDigital GDCP-A and
GSE-TRA transmitters
NEW!
bulletCombination Gas Detectors
bulletCO and NO2
bulletCO and O2
bulletNO2 and O2
bulletGSE-TK-CO Test Kit NEW!
bulletDistributors
bulletFAQs
bulletTechnical Information

 

Brasch Combination Carbon Monoxide and Nitrogen Dioxide Detector and Transmitter

Brasch CO/NO2 Gas Detector Brasch GSE-NCM-LL Combination Carbon Monoxide/Nitrogen Dioxide Detector

 Typical Applications
bullet Car, Truck and Bus Parking Garages
bullet Postal/Parcel Facilities
bullet Loading Areas
bullet Warehouses and Factories
bullet Firehouses

Brasch CO/NO2 Gas Detector  Brasch GSE-NCM-LR Combination Carbon Monoxide/Nitrogen Dioxide Detector

These products combine nitrogen dioxide (NO2) and carbon monoxide (CO) detection into an energy saving unit. Diesel engine exhaust is a common producer of NO2, and gasoline engine exhaust is a common producer of CO.  In accordance with recognized National Standards the permissible exposure limit of NO2 is 1 PPM and for CO the limit is 100 PPM. The Brasch Combination Detector utilizes a dual sensor system that monitors both harmful gases.  The easy to read digital display continuously oscillates between NO2 and CO concentration readings.

As target gas levels increase, contacts are provided to actuate ventilation equipment and an audible internal alarm will activate if levels continue to rise.  Since ventilation equipment is only required when levels are elevated, energy costs for HVAC operation are significantly reduced. 

The Brasch Combination Detector accepts two sensor inputs and may be provided with both signals integral (local), one integral and one remote or both remote.  When a remote signal is desired, the Detector is provided with Brasch Gas Transmitter(s) as required.

Key Features Literature
bullet Electrochemical Sensors
bullet Microprocessor Controlled
bullet Factory Calibrated
bullet Static Discharge Protection
bullet Low Voltage Wiring
bullet Power Loss Fail-Safe
bullet Easy To Read Display 
bullet Corrosion Resistant Enclosure
bullet High and Low Alert Level
bullet Temperature & Humidity Compensation
bullet Selectable Nitrogen Dioxide Low Level Setpoint
bullet Adjustable Alert Time Delay
bullet Remote Alarm Contacts
bullet 4-10 mA, 0-1 VDC, 0-5 VDC or 0-10 VDC Output
GSE-NCM-D Zip Submittal Compilation of the following individual files (1.0 Mb)
bullet A-211 Brasch Gas Detector Brochure (724 Kb)
bullet I-687 GSE Brasch Gas Detector Installation, Operation and Maintenance Instructions (355 Kb)
bullet S716 Brasch Combination Carbon Monoxide / Nitrogen Dioxide Gas Detector Sample Specification (12 Kb)
bullet GSE Detector Operating Sequence (9 Kb)
bullet GSE Detector Typical Mounting and Wiring Diagrams (112 Kb)
bullet GSE Detector Submittal Form (76 Kb)
GSE-NCM-T Zip Submittal Compilation of the following individual files: (819 Kb)
bullet A212 Brasch Gas Transmitter Brochure (667 Kb)
bullet I-688 GSE Gas Transmitter Installation, Operation and Maintenance Instructions (110 Kb)
bullet S736 Brasch Combination Carbon Monoxide / Nitrogen Dioxide Gas Transmitter Sample Specification (11 Kb)
bullet GSE-TRNS Transmitter Typical Mounting and Wiring Diagrams (28 Kb)
bullet GSE-TRNS Transmitter Submittal Form (77 Kb)

                                  Copyright © 2015 Brasch Manufacturing Company Inc.
                                 Last modified: 09/02/15 This website is best viewed using Internet Explorer ® 7.0 or later at 800x600 or higher resolution.
                                  In order to view documents downloaded from this web site, use Adobe Acrobat Reader®, available free by clicking this link.